How is it prepared?
- Silk Plaster liquid wallpaper comes packaged in powder form, in bags or sealed packages.
- Each package covers a specified area, usually between 3 and 5.5 square meters, depending on the thickness of the layer applied.
Required materials:
- Silk Plaster liquid wallpaper set
- Water - according to the instructions on the package.
- Mixing bucket .
- Hand mixer or spatula for mixing.
- Trowel for wall application.
- Primer for surface preparation.
Steps for preparing and applying Silk Plaster liquid wallpaper:
1. Surface preparation:
- Clean the wall of dust, grease or other impurities.
- Apply two coats of primer and let it dry completely. It will ensure a better adhesion of the wallpaper.
2. Mixing the wallpaper:
- Pour the required amount of water into a bucket, according to the instructions on the package.
- Add the Silk Plaster liquid wallpaper powder to the water.
- Mix well to get a homogeneous composition and there are no more lumps. This process may take several minutes.
3. Rest time:
- Let the mixture rest for the amount of time indicated on the package (usually several hours). This allows the material to fully hydrate.
4. Applying the wallpaper:
- Use a trowel to apply the liquid wallpaper to the wall.
- Spread the material evenly over the prepared surface in a thin, even layer.
- Make sure there are no gaps or uncovered areas.
5.Drying:
- Allow the wallpaper to dry completely. Drying time may vary depending on the thickness of the applied layer and ambient conditions, but generally takes between 24 and 48 hours.